Solder Resist

Type – All types available. If not specified Electra EMP110/390 green is used as standard.

Thickness – 25 um over surface patterns

Colours available - Green, red, blue, black, clear, white, yellow
Finish- Gloss, semi-gloss, matt

Clearance required on pads 0.05mm

Minimum solder resist dams between SMT pads 0.125mm

Minimum line features 0.1mm
Standard line features 0.2mm

Colours available – White, yellow, black, blue, red, green

Alignment positional tolerance +/- 0.2mm / 0.008 thou