DATA FORMATS

We can accept all data formats including:

DXF
ODB++
Extended Gerber ( Preferred )
Standard Gerber
DPF
HPGL ( for drawing )
Excellon ( drill files )
SIEB Meyer ( drill files )
IPC-D-356 ( netlist files )
Mentor ( netlist files )

If your preferred method is not listed please contact our engineering department –
engineering@wrekin-circuits.co.uk

What data is required?
All layers
Solder resist – top and bottom
If applicable ident, peelable masks, masks for plugging vias.
Profile drawing with all tolerances designed.
Pad plot to identyfy the positions and size of the holes.

PCB details
Build for multilayers
Circuit dimensions
Panelisation information if not supplied as a single circuit.
Release required e.g. C of C, UL, BS

Special requirements e.g. High voltage test, controlled impedence.

Solderable finish e.g. HASL, Au over nickel, tin

Gold plating – e.g. Hard gold, soft gold, including chamfer details for edge connectors.

Solder resist – type e.g. Gloss, semi gloss, matt
Colour e.g. Green, white, red, blue, clear, yellow, and black.

Silk screen ident -type and colour as above.